How to give statement of conformity as per NABL/ISO/IEC 17025:2017

 “The laboratory shall report on the statement of conformity, such that the statement clearly identifies: a) to which results the statement of conformity applies; b) which specifications, standards or parts thereof are met or not; c) the decision rule applied.

A conformity statement or a statement of conformity is an expression that clearly describes the state of compliance or non-compliance to a specification, standard, or requirement.

Type of statements of conformity

While we are on the topic of statements of conformity, it is important to review the three most common types of conformity used in accredited test and calibration reports.

The three most common types of conformity are:-

a.     Compliance

b.     Non-Compliance

c.      Indeterminate

Below is a list of commonly used statements of compliance:

a.     Compliance

b.     Pass

c.      In spec

d.     Within Specification

e.     In Tolerance

Below is a list of commonly used statements of non-compliance:

a.     Non- Compliance

b.     Fail

c.      Out of spec

d.     Outside Specification

e.     Out of Tolerance

f.       Exceeds Limits

Comments

Post a Comment

Popular posts from this blog

RETAIL SECURITY GUARDS

Image
  RETAIL SECURITY GUARDS SERVICE COVER: ·          Loss Prevention Training and Awareness ·          Special Event (Tent Sale) ·          Coverage Parking Area Patrol ·          Site Surveys/Risk Assessments ·          24/7 Dispatch and Supervision ·          Crowd Control ·          Closed Circuit ·          Monitoring Access Control   Security Services can provide the right plan of action to put a stop to theft and shrinkage with retail security services. Retail shopping stores are facing increasing need for superior security. Thieves routinely fill their bags with merchandise and exit the store undetected. Employee theft can occur right u...
Read more

FIRE SAFETY

Image
  Fire safety is the set of practices intended to reduce the destruction caused by Fire. It includes those that are intended to prevent ignition of an uncontrolled fire, and those that are used to limit the development and effects of a fire after it starts. All of our work forces are trained to handle all fire fighting equipments and thus in case of emergency they need not depend on fire brigade to extinguish the fire to avoid destruction.   The fire is a common and serious emergency situation that security has to deal with. As a security guard, your main duty is to protect people and property but the fire can destroy both in a minute. You should manage and look over the fire hazard on your site. Mostly, the security guards are the first person to detect in the early stage of fire. In the case of fire, you have to know how to react quickly and confidently. So, you should know the available types of fire equipment and their location on your site. Not only this but also...
Read more

How to calculate combined uncertainty for NABL/ISO/IEC 17025:2017

Image
To calculate the uncertainty of your measurements, you'll need to find the best estimate of your measurement  and consider the results when you add or subtract the measurement of uncertainty. After measuring the individual uncertainty due to type A and type B, the combined uncertainty (U c ) is calculated as follows; U c  = √ (U 1 2  + U 1 2  + U 1 2 +……) Where; U 1,  U 2,  U 3  etc are uncertainties calculated with same units        Another method of combining uncertainty with different units of measure is fractional uncertainty. 1.      Identify the equation 2.      Calculate the fractional uncertainty for each contributor 3.      Calculate the combined uncertainty 4.      Convert the result to the desired unit of measure. The quantities that affects the measurand may not have a direct one to one relationship with it. Ind...
Read more